Fishing Sea

What advantages are there to carbon ski poles and are they worth the extra cost?

I stole a great pair of Carbon Fiber poles one day in Vermont. I love them.

Just kidding. After bending or breaking aluminum poles for years I picked up a pair of Goode poles a few years ago. I beat the snot out of them for years. The basket broke before the pole did...actually, the pole never broke.

I bought another pair at end of season three years ago. I still use these but now switch off between a pair of aluminum Black Diamond poles. The carbon poles, while tough as heck, don't adjust...so when I'm in the backcountry I used the BD poles. If I'm at the resort all day...I use the Goode poles.

Also...you can get a decent pair of carbon poles for $25. Just look around. They won't break your bank.

2007-12-11 14:09:53 by Andy

New light weight pole from SimPole less then 8 pounds for 50 feet. Totally adjustable.

I just ordered a talon protector 60 which is a carbon fiber shaft covered in wood veneer. i am currently using a krypto pro, and i know that the talon will be heavier, but i think i should be able to use it. Was this a mistake?

It all depends on how you play defense. If you run it up field alot then a lighter pole would've been better. If you just focus on pokechecks and hard hits then you have an ok shaft.I've always liked using a lighter d-stick. You can manuever it around more easily and it is easier to get ground balls and run with the ball.

2008-03-11 19:55:48 by James

qty. 1

Legacy 3D33M Head Unit

# Fold Down Detachable Panel
# 3 Inch TFT Wide Display
# 16:9 or 4:3 Wide Display
# NTSC PAL Compatible
# Picture Brightness/Contrast/Chroma/Hue
# Preset EQ Mode
# USB Function
# Subwoofer Output
# AUX Input Function
# 4 Channel RCA Output
# 30 Preset Stations
# Support DVD/VCD/CD/MP3/WMA/JPG
# Repeat/Program/Random
# AM/FM Stereo Radio System
# Auto Memory Store/ Preset Scan
# MAX Output: 80 Watts x 4 Channels
# Card Size Full Function Remote Control



qty. 2

PIONEER TS-W3001D2 (TSW3001D2)
12" PREMIER CHAMPION Series PRO 3000W SUBWOOFER

* 12" Champion Series Pro
* Woofer Cone Material : Interlaced Carbon Fiber/Glass Fiber Reinforced
* Surround : Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
* Voice Coil : Dual 4-Layer, Long Voice Coil
* Voice Coil Wire : Copper
* Voice Coil Bobbin : Phenol Resin Coated Glass Cloth
* Projected Pole Yoke with Vented Pole
* Magnet : Double Stacked 110oz
* Aluminum Die-Cast Rigid Chassis
* Gasket 1-Piece Rubber
* Integrated Single-Sided Silver Compression Terminals
* Max Power : 3000 Watts
* Nominal Power Handling : 1000 Watts
* Frequency Response : 18Hz~700Hz
* Sensitivity : 89 dB
* 2-Ohms Impedance
* Recommended Enclosure Size : 0.50~1.0 Cubic Ft
* Mounting Depth : 7.5"
* Approximate Weight : 27 LBS

qty. 1

BOSS OL4KD
MONO Class-D 4000W OUTLAW Series AMPLIFIER

* Class D Operation
* MOSFET PWM (Pulse Width Modulated) Power Supply
* One Ohm Stable Mono Operation
* Thermal, Overload and Speaker Short Protection
* Strapping Capability : Strap two Amps together for twice the power
* Soft Turn-On Circuit
* Remote Turn-On/Off Circuit
* Variable Input Gain Control
* Input Voltage Sensitivity Selector
* Variable Subsonic Filter : 15Hz~40Hz (24dB/Octave)
* Variable Subsonic Filter : 50Hz~150Hz (24dB/Octave)
* Variable 0-+18dB Bass Boost
* 0/180° Phase Shift Selector
* Nickel-Plated RCA Low Level Inputs
* Nickel-Plated Speaker and Power Terminals
* LED Power and Protection Indicators
* Red Anodized Heatsink
* Remote Subwoofer Level Control


# SPECIFICATIONS

* Amplifier Class : Class D
* Number of Channels : 1-Channel
* Maximum Power : 4000 Watts
* RMS Power Output @ 4 Ohms : 1550 Watts x 1-Channel
* MAX Power Output @ 2 Ohms : 2800 Watts x 1-Channel
* Bridged Power : N/A
* THD (Total Harmonic Distortion) : 0.01%
* Signal-to-Noise Ratio (dB) : 100dB
* Frequency Response (Hz) : 20Hz~150Hz
* Built-in Crossover : N/A
* Subsonic Crossover Frequency : 15Hz~40Hz
* Low-Pass Crossover Frequency : 50Hz~150Hz
* Bass Boost : 0-+18dB
* Bass Remote : Yes
* Fan Cooled : N/A
* Fuse Rating : 30A x 3
* Dimensions (Width x Height x Length) Inches : 11-5/16" x 2-5/8" x 14-3/16"
* Approximate Weight : 15 LBS
* Warranty Information : 1 Year Warranty

qty. 1

HBX 12VEGA 12" Dual Ported MDF Subwoofer Box

* High Quality 3/4" MDF Construction
* Gold Binding Post Terminals
* Color: Black
* Port Size : 2"x 12 1/2"
* Dimensions (WxHxD): 36" x 14" x 16"
* Weight: 48 lbs

qty. 2

Pyramid TW36 7" x 3" Wide Dispersion Horn Tweeter

* 7" x 3" Wide Dispersion Horn Tweeter
* Die Cast Metal Black Anodized Frame
* Frequency Response: 1.8-25kHz
* 75 Watts RMS/150 Watts Peak Power
* Ferro Fluid Enhanced
* 20 oz. Magnet Structure
* 4 Ohms Impedance
* Sensitivity: (2.38 v,Im) 93dB
* Pair in Gift Box
* Includes Compensation Capacitors

qty. 1

EARTHQUAKE AK-5000 (AK5000)
4-Gauge 5000W Complete Amplifier Installation KIT

* Includes:
o Red Power Wire : 17 ft : 4-Gauge
o Black Ground Wire : 3 ft : 4-Gauge
o Speaker Wire : 20 ft : 16-Gauge
o Blue Remote Turn On Wire : 16 ft : 16-Gauge
o Silver Twisted-Pair RCA Interconnect : 6 ft : Straight
o Black Split Loom : 6 ft : OD 8mm
o Gold Plated ANL Fuse Holder : ANL Fuse : 150 A
o 4 x 4 Gauge Gold "O" Ring Terminal : 2 Red / 2 Black
o 2 x 4 Gauge Gold "U" Ring Terminal : 1 Red / 1 Black
o 4 x 14-16 Gold gauge "U" Terminal for speaker terminals on amp : 2 red / 2 black
o 1 x 16-22 Gauge butt connector for remote turn-on wire : 1 red
o 1 x self tapping screw : 1 tinned
o 10 x black cable ties : 120mm long
o 1 x grommets in black


qty. 2

Hitron SPW18-100
18 Gauge 100FT Speaker Wire SPW18100

18 Gauge 100FT Speaker Wire Spool





Question 1.

Will this sound good?


Question 2.

will the 5000 watt amp install kit work with 4000 watt amp?


Question 3.

Are my tweeters hooked up to my amp or my Head Unit??

those subs r real good they hold there own for spl comp. as far as the amp you probably want to change the brand cause a long time ago when i first started to get into audio i got the riot series and they sucked. if money is a factor i would go with hifonics 2000rms @ 1 ohm on ebay for about 250. as far as the other post about RF p3 they really suck they dont even last 5 min with 1000 watts thrown at them
trust me youtube it. chek this list out:

HU = Head Units
A = Amps
SW = Subs
Sp = Mids/Highs
M = Multimedia
All = Entire Line

Stay Away

American Pro (All)
Audiobank (All)
Blackmore Mobile Electronics (All)
Blitz (All)
DHD (All)
Diesel Audio (All)
Kenford (All)
Kole Audio (All)
Legacy (All)
Majestic (All)
Performance Teknique (All)
Phase Linear (All)
Pyle (All)
Pyramid (All)
Rockwood (All)
Sherwood (All)
SPL (all)
Solid Audio (All)
Sound Storm (All)
Street Edge (All)
Ultra Linear (All)
XFile Audio (All)


Entry Level

Alphasonik (All)
Alto Mobile USA (All)
Alumapro (All)
Ample Audio (All)
Audiobahn (All)
Audiopipe (All)
Audiovox (All)
Autotek "SS Series" (All)
Bazooka (All)
Blaupunkt (All)
Boss (All)
Bostwick (All)
Cadence ("All" tough decision just shy of high quality)
Cerwin Vega ("All" except Strokers which go in Comp')
Clarion (A, SW, Sp)
Clif Designs (All)
Concept (All)
Coustic (All)
Crossfire "P Series" (SW)
Crunch (All)
Cutting Edge Audio (All)
DB Drive (All)
Diablo Audio (All)
Digital Audio (All)
Dual (All)
Dub Mag Audio (All)
Elevation Audio ("All" except EX Series (SW) which go in Comp)
Emerson (All)
Harrison Labs (All)
Hifonics "Zues Series and lower" (All)
Hollywood Sound Intl. Corp (All)
Infinity (All)
Interfire (All)
JBL ("All" except ??? Series which go in Comp')
Jensen (All)
JVC (All)
Kenwood ("All" except Excelon series which go in HQ)
Kicker "Comp/Comp VR" (SW) "RS Series and under" (Sp)
Kove Audio (All)
Lanzar ("All' except Opti Drive series which go in HQ)
Lightning Audio (All)
MA Audio ("All" except larger/upper model HK Series amps which go in HQ)
Matrxx Audio (All)
MB Quart (SW)
Memphis "PR Series" (All)
MTX ("All" except 9500 Series (SW) which go in HQ)
Niche Audio (All)
Phoenix Gold (SW)
Pioneer (SW,Sp,A)
Planet Audio (All)
Polk Audio (All)
Power Acoustik (All)
Powerbase (All)
Profile (All)
Rockford Fosgate ("All" except Power Series which go in HQ)
Sanyo (All)
Scosche (All)
Sony (All)
SoundStream (All)
Swiss Audio (All)
US Acoustics (All)
Visonik (All)
Xsite (All)


High Quality

A/D/S/ (All)
Adire Audio (All)
Alpine (All)
American Bass (All)
Ascendant Audio (All)
AudioControl (All)
Audison (All)
Avionixx (All)
Boston Acoustics (All)
Brax (All)
CDT Audio (All)
Clarion (HU, M)
Critical Mass (All)
Crossfire "W Series" (SW) "VR Series" (A)
Crystal (All)
Diamond Audio (All)
Directed (All)
DLS (All)
Dynaudio (All)
Earthquake (All)
Elemental Designs (All)
Eclipse (All)
Focal (All)
Fusion (All)
Genesis (All)
Helix (All)
Hifonics "Brutus Series" (All)
Image Dynamics (All)
Incriminator Audio (All)
JL Audio ("All" except lower W series (SW) which go in Entry)
Kenwood "Excelon series" (All)
Kicker "KX/SX Series" (A) "L5/L7" (SW) "SS Series" (Sp)
Lanzar "Opti Drive" (A)
MA Audio "HK2000/HK4000" (A)
Massive Audio (All)
MB Quart (Sp)
McIntosh (All)
Memphis (MC Series) (All)
Milbert (All)
Morel (All)
MTX "9500 Series" (SW)
Nakamichi (All)
Orion (A,SW,Sp)
OZ Audio (All)
PHD Audiophile Sound System (All)
Phase Evolution (All)
Phoenix Gold (A)
Pioneer (HU,M)
Powerbass USA (All)
Precision Power (All)
QAS (All)
RE Audio ("All" except MT Series (SW) which go in Comp)
Rockford Fosgate "Power Series" (SW,A)
Seas Lotus (All)
Sinfoni (All)
Treo Engineering (All)
TRU Technology (All)
Tube Driver Blue (All)
US Amps (All)
Xtant (All)
Zapco (All)

Competition

Alpine F1 (All)
Atomic (SW,A)
Autotek "MM Series" (All)
Cerwin Vega "Stroker" (SW)
Digital Designs (All)
Elevation Audio EX Series (SW)
Hifonics "XX Series" (All)
JBL "JBL/Crown Series" (A) "G TI Series" (SW)
Kicker "Solo X" (SW)
MMats Professional Audio (All)
MTX RFL (SW)
Pioneer TS-W5000SPL (SW)
Rainbow (All)
RE Audio "MT Series" (SW)
Team RF (SW)

2009-01-15 20:41:41 by Logan A

im getting 2 PIONEER TS-W3001D4 (TSW3001D4)
12" PREMIER CHAMPION Series PRO 3000W SUBWOOFER

Features:

o 12" Champion Series Pro
o Woofer Cone Material : Interlaced Carbon Fiber/Glass Fiber Reinforced
o Surround : Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
o Voice Coil : Dual 4-Layer, Long Voice Coil
o Voice Coil Wire : Copper
o Voice Coil Bobbin : Phenol Resin Coated Glass Cloth
o Projected Pole Yoke with Vented Pole
o Magnet : Double Stacked 110oz
o Aluminum Die-Cast Rigid Chassis
o Gasket 1-Piece Rubber
o Integrated Single-Sided Silver Compression Terminals
o Max Power : 3000 W
o Nominal Power Handling : 1000 W
o Frequency Response : 18 - 700 Hz
o Sensitivity : 89 dB
o 2 or 8 ohm Capability
o Recommended Enclosure Size : 0.50 ~ 1.0 Cubic Ft
o Mounting Depth : 7.5"


with this amp - HIFONICS BXi2008D
MONO Class-D 2000W BRUTUS Series 25TH Anniversary AMPLIFIER


Features:

o 1-Channel Mono-Block Operation
o 650 Watts RMS x 1 @ 4-Ohms
o 1300 Watts RMS x 1 @ 2-Ohms
o 2000 Watts RMS x 1 @ 1-Ohms
o SUPER D-Class Amplifier Topography
o Ultra-Fi MOSFET Outputs
o Illuminated HIFONICS Logo
o PWM MOSFET EXVP (Exponential Vari-Power Supply)
o SPC Twin Turbo-Torroids with Simpatico Coil Design
o Fully Adjustable Accu Cross Crossover
+ 24dB Subsonic Filter (Adjust 15Hz~35Hz)
o Phase Shift Adjustments (0 to 180 Degrees)
o 24dB Low-Pass Crossover (Adjust 35Hz~250Hz)
o Bass Boost : Variable Equalization (+10dB @ 45Hz)
o Remote Bass Control Included
o Balanced Line Inputs with optional Hifonics MM-BLD-1
o Gold RCA Line Outputs
+ Permits Amplifier Daisy Chaining
+ 0.2V to 9V Signal Level
o 4-Gauge Power Connectors

* SPECIFICATIONS
o Amplifier Class : Class-D
o Number of Channels : 1-Channel
o Maximum Power : 2000 Watts
o RMS Power Output @ 4 Ohms : 650 Watts x 1-Channel
o RMS Power Output @ 2 Ohms : 1300 Watts x 1-Channel
o Bridged Power : N/A
o THD : 0.08%
o Signal-to-Noise Ratio (dB) : 95dB
o Frequency Response (Hz) : N/A
o Built-in Crossover : Yes
o High-Pass Crossover Frequency : N/A
o Low-Pass Crossover Frequency : 35Hz~250Hz
o Bass Boost : 0dB~10dB
o Bass Remote : Yes
o Fan Cooled : N/A
o Fuse Rating : 200A Dimensions (Width x Height x Length) Inches : 9.45" x 2.52" x 14.97
o Approximate Weight : 15.6 LBS

and the subs will go in this box : HBX 12VEGA
12" Dual Ported MDF Subwoofer Box

Features:

o High Quality 3/4" MDF Construction
o Gold Binding Post Terminals
o Color: Black
o Port Size : 2"x 12 1/2"
o Dimensions (WxHxD): 36" x 14" x 16"
o Weight: 48 lbs

I also want these horn tweeters: Pyramid TW36
7" x 3" Wide Dispersion Horn Tweeter

Features:

o 7" x 3" Wide Dispersion Horn Tweeter
o Die Cast Metal Black Anodized Frame
o Frequency Response: 1.8-25kHz
o 75 Watts RMS/150 Watts Peak Power
o Ferro Fluid Enhanced
o 20 oz. Magnet Structure
o 4 Ohms Impedance
o Sensitivity: (2.38 v,Im) 93dB
o Pair in Gift Box
o Includes Compensation Capacitors

with this speaker wire: Hitron SPW18-100
18 Gauge 100FT Speaker Wire SPW18100

Features:

o 18 Gauge 100FT Speaker Wire Spool


And this Amp install Kit: EARTHQUAKE AK-5000 (AK5000)
4-Gauge 5000W Complete Amplifier Installation KIT

* Includes:
o Red Power Wire : 17 ft : 4-Gauge
o Black Ground Wire : 3 ft : 4-Gauge
o Speaker Wire : 20 ft : 16-Gauge
o Blue Remote Turn On Wire : 16 ft : 16-Gauge
o Silver Twisted-Pair RCA Interconnect : 6 ft : Straight
o Black Split Loom : 6 ft : OD 8mm
o Gold Plated ANL Fuse Holder : ANL Fuse : 150 A
o 4 x 4 Gauge Gold "O" Ring Terminal : 2 Red / 2 Black
o 2 x 4 Gauge Gold "U" Ring Terminal : 1 Red / 1 Black
o 4 x 14-16 Gold gauge "U" Terminal for speaker terminals on amp : 2 red / 2 black
o 1 x 16-22 Gauge butt connector for remote turn-on wire : 1 red
o 1 x self tapping screw : 1 tinned
o 10 x black cable ties : 120mm long
o 1 x grommets in black



Question 1: will this sound good?

Question 2: will my speaker wire and amp install kit work?

Question 3: can i wire those subs and box to a 1ohm load?

Questi

Sounding good? More than likely, with the bass all the sound depends on the box your putting the subs in. That box looks good. About 4.2 cu ft or so. Try getting a multi channel amp and put your speakers on an amp to help the highs and mids.

I'd go with a 1 gauge wiring kit instead of a 4 gauge kit.

The subs are dual 4 ohm which means they can be wired down to 1 - 2ohms. It's good it'll receive more power.

2009-01-18 13:02:54 by Logan A

im going to get


two Pioneer Champion Series Pro 12" TS-W3001D4

Watts MAX. Music Power 3000 Watts
Watts Nominal Power Handling 1000 Watts
Frequency Response 18 Hz to 700 Hz
Sensitivity 89 dB
Ohm Rating D2: (1 or 4 ohm) D4: (2 or 8 ohm)
Recommended Enclosure 0.50 ~ 1.0 Cubic Feet
Dimensions 329 mm x 214.2 mm
Mounting Depth 188.8 mm
Size 12"
Woofer Cone Material Interlaced Carbon Fiber/Glass Fiber Reinforced
Surround Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
Voice Coil Dual 4-Layer, Long Voice Coil
Voice Coil Wire Copper
Voice Coil Bobbin Phenol Resin Coated Glass Cloth
Projected Pole Yoke with Vented Pole
Magnet Construction Double Stacked (110oz)
Basket Design Aluminum Die-Cast Rigid Chassis
Gasket 1-Piece Rubber
Wire Terminals Integrated Single-Sided Silver Compression Terminals


My head Unit isnt the best but it is a Legacy LD33M

Fold Down Detachable Panel
3 Inch TFT Wide Display
16:9 or 4:3 Wide Display
NTSC PAL Compatible
Picture Brightness/Contrast/Chroma/Hue
Preset EQ Mode
USB Function
Subwoofer Output
AUX Input Function
4 Channel RCA Output
30 Preset Stations
Support DVD/VCD/CD/MP3/WMA/JPG
Repeat/Program/Random
AM/FM Stereo Radio System
Auto Memory Store/ Preset Scan
MAX Output: 80 Watts x 4 Channels
Card Size Full Function Remote Control


My Amp is a Hifonics Brutus BXi Series Super D-Class™ Champions


Hifonics New Illuminated Heat-Sink Design With Blue LED Light Pumps
Hifonics Blue Illuminated Logo
Maxxsonics Illuminated "M" End Panel Logo
Heavy-Duty Ultra-Fi™ MOSFETS
Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output
Fully Adjustable Accu-Cross™ Crossovers
±18dB Variable Bass Equalization @ 45Hz
180° Variable Phase Control (15 to 35Hz)
Dash-Mountable Bass Remote Control Included
Variable 24dB Subsonic Filter
Brutus Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply)
Twin-Turbo Torroid Coil Design
HSMD Hifonics Surface Mount Design
Balance Line Inputs for our 18-Volt Line Drivers
RCA Line Output for Amplifier Daisy Chaining
Gold Oversized 2-Gauge Power Connectors
2000-Watt x 1 RMS @ 1-Ohm


My install kit is Earthquake Sound AK-5000 Complete Amplifier Installation Kit Triple Gold Plated 5000 Watts/ 4-Gauge


80ft High- Power Cables for Amps, Speakers, and Head Unit
Over 20 Gold Plated terminals, connectors, screws and ties.
Red Power Wire: 17ft (5.18m); 4-Gauge
Black Ground Wire: 3ft (0.9m); 4-Gauge
Speaker Wire: 20ft (6.1m); 16-Gauge


I cant remember the brands but im pretty sure i got an SPL 2 farad capacitor and 12 gauge speaker wire.

I also got a dual 12 inch vented sub enclouser
Air-Space is 3.40 Cu. Ft.
Mounting Depth is 15"
DIMENSIONS: 36" Wide x 16.25" Deep x 13.25" High

That will sound good but you need at least 1/0 gauge wire for that amount of power.That box would be good for those subs too but you should use 8 or 10 gauge wire for subs

2009-01-24 13:04:44 by Logan A

im going to get


two Pioneer Champion Series Pro 12" TS-W3001D4

Watts MAX. Music Power 3000 Watts
Watts Nominal Power Handling 1000 Watts
Frequency Response 18 Hz to 700 Hz
Sensitivity 89 dB
Ohm Rating D2: (1 or 4 ohm) D4: (2 or 8 ohm)
Recommended Enclosure 0.50 ~ 1.0 Cubic Feet
Dimensions 329 mm x 214.2 mm
Mounting Depth 188.8 mm
Size 12"
Woofer Cone Material Interlaced Carbon Fiber/Glass Fiber Reinforced
Surround Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
Voice Coil Dual 4-Layer, Long Voice Coil
Voice Coil Wire Copper
Voice Coil Bobbin Phenol Resin Coated Glass Cloth
Projected Pole Yoke with Vented Pole
Magnet Construction Double Stacked (110oz)
Basket Design Aluminum Die-Cast Rigid Chassis
Gasket 1-Piece Rubber
Wire Terminals Integrated Single-Sided Silver Compression Terminals


My head Unit isnt the best but it is a Legacy LD33M

Fold Down Detachable Panel
3 Inch TFT Wide Display
16:9 or 4:3 Wide Display
NTSC PAL Compatible
Picture Brightness/Contrast/Chroma/Hue
Preset EQ Mode
USB Function
Subwoofer Output
AUX Input Function
4 Channel RCA Output
30 Preset Stations
Support DVD/VCD/CD/MP3/WMA/JPG
Repeat/Program/Random
AM/FM Stereo Radio System
Auto Memory Store/ Preset Scan
MAX Output: 80 Watts x 4 Channels
Card Size Full Function Remote Control


My Amp is a Hifonics Brutus BXi Series Super D-Class™ Champions


Hifonics New Illuminated Heat-Sink Design With Blue LED Light Pumps
Hifonics Blue Illuminated Logo
Maxxsonics Illuminated "M" End Panel Logo
Heavy-Duty Ultra-Fi™ MOSFETS
Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output
Fully Adjustable Accu-Cross™ Crossovers
±18dB Variable Bass Equalization @ 45Hz
180° Variable Phase Control (15 to 35Hz)
Dash-Mountable Bass Remote Control Included
Variable 24dB Subsonic Filter
Brutus Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply)
Twin-Turbo Torroid Coil Design
HSMD Hifonics Surface Mount Design
Balance Line Inputs for our 18-Volt Line Drivers
RCA Line Output for Amplifier Daisy Chaining
Gold Oversized 2-Gauge Power Connectors
2000-Watt x 1 RMS @ 1-Ohm


My install kit is Earthquake Sound AK-5000 Complete Amplifier Installation Kit Triple Gold Plated 5000 Watts/ 4-Gauge


80ft High- Power Cables for Amps, Speakers, and Head Unit
Over 20 Gold Plated terminals, connectors, screws and ties.
Red Power Wire: 17ft (5.18m); 4-Gauge
Black Ground Wire: 3ft (0.9m); 4-Gauge
Speaker Wire: 20ft (6.1m); 16-Gauge


I cant remember the brands but im pretty sure i got an SPL 2 farad capacitor and 12 gauge speaker wire.

I also got a dual 12 inch vented sub enclouser
Air-Space is 3.40 Cu. Ft.
Mounting Depth is 15"
DIMENSIONS: 36" Wide x 16.25" Deep x 13.25" High

sub doesnt have great sensitivity but its alright. 2 of them should be good

2009-01-25 13:29:03 by Logan A